From disaster to dream: an small backyard pool transformation story
Project overview
Location: New Lambton Heights, NSW
Pool: Compass Pools Express Range – Refresh 6.1 Max
Completion: July 2025
Builder: Compass Pools Manufacturing Australia
Photographer: James, Zeal Productions
What began as a catastrophic pool failure became an opportunity for innovation. This project not only restored a homeowner’s backyard and confidence in pool ownership, it also delivered the first test installation of a modified in-wall cleaning system for the Compass Pools Express Range.
Through careful engineering, collaboration between trades and an inventive installation strategy, a hazardous and structurally compromised pool was transformed into a compact, low-maintenance small backyard pool centrepiece that enhances both lifestyle and property value.

The challenge
The project began with a significant structural failure.
The original vinyl liner pool had developed major leakage issues, eventually emptying into the neighbouring Black Butt Reserve. A replacement pool was installed but poorly executed, sitting approximately 10cm above the deck height, creating both aesthetic problems and safety concerns.
After years of frustration, the homeowners decided to start again.
Their brief was clear:
• A smaller, freestanding pool suited to downsizing
• Lightweight construction due to site constraints
• Long-term structural reliability
• Minimal maintenance in a heavily treed environment
• A visually integrated design that enhanced the landscape
The solution also needed to overcome significant site constraints, including narrow side access and established jacaranda trees that prevented traditional crane installation.

The solution
The homeowners worked closely with Anthony Cross to develop a solution that addressed both the structural failures of the past and the practical realities of the site.
The chosen pool was the Compass Pools Refresh 6.1 Max from the Express Range, measuring 6.0m x 3.0m. Downsizing from the original 10m x 4m pool allowed the backyard to function more effectively while increasing usable entertaining space.
Several key innovations shaped the project.
R&D cleaning system
This installation became the first pilot project for a modified in-floor cleaning system adapted into an in-wall configuration for the Express Range.
The system was specifically designed to manage debris in leafy environments while reducing manual cleaning requirements. The homeowners agreed to participate in the pilot installation, allowing Compass Pools to assess the system as a potential future product offering.
GRP structural framing
The pool incorporates a GRP structural framing system, allowing decking to be built directly onto the pool shell. This design solved the height alignment issues created by the previous installation and ensured long-term structural stability.
Lightweight fibreglass engineering
The fibreglass construction of the Express Range proved critical. The lightweight shell allowed installation methods that would not have been possible with concrete or precast alternatives.

Complex installation
One of the most challenging aspects of the project was site access.
The pool location was at the far end of the property with narrow side access. Established trees prevented a traditional crane lift over the house.
To overcome this, Brad Gunning Cranes engineered a custom installation strategy:
- The fibreglass shell was transported on its side.
- A tracked carrier moved the pool through the narrow access corridor.
- A secondary crane lift positioned the shell into its final location.
This method allowed the installation to proceed without removing trees or damaging the property.
Neil Harvey Building completed the structural works, including demolition of the existing deck, slab preparation and construction of the new deck integrated with the GRP framing system.

Design and aesthetics
The final design balances functionality with visual integration.
The rectangular Refresh 6.1 Max features full-length entry steps and a flat-bottom profile that supports debris movement toward the cleaning system.
The internal finish, Bi-luminate Viridian, reflects surrounding greenery and creates a deep, natural water colour that complements the bushland setting.
The outdoor space was completed with:
• Glass fencing along the house side for uninterrupted water views
• Black steel fencing integrated with the existing boundary
• Two-tone tile and timber decking for warmth and contrast
• A Daisy in-deck roller cover for safety and thermal efficiency
The result is a clean, contemporary small backyard pool that sits comfortably within the heavily treed landscape
.
Equipment and performance
The equipment specification prioritised energy efficiency, flexibility and ease of use for this small backyard pool.
The system includes:
• Astral 18kW heater
• Astral variable speed pump
• Astral Halo chlorinator
• Astral sand filter
• Halo sanitation system suitable for mineral or chlorine pools
• Daisy in-deck roller cover
• Acoustic equipment enclosure
This configuration supports extended swim seasons, quieter operation and reduced manual maintenance.

The outcome
The completed project transformed a long-standing structural problem into a high-performing backyard feature.
The new small backyard pool delivers:
• A compact, lifestyle-focused design suited to downsizing
• Significantly reduced maintenance requirements
• Improved safety and structural reliability
• Enhanced visual integration with the surrounding bushland
• Increased outdoor entertaining space
Importantly, the project also contributed to product development within the Compass Express Range, demonstrating the viability of the in-wall cleaning system for future installations.
What was once a costly liability is now a durable, low-maintenance asset and the visual centrepiece of the property.